How to Wear Your Tidy Gaiters

In the following guide, you will learn how to properly put on and use your new Tidy Gaiters.

Preparation of Your Shoes

Step 1

Cut two pieces of the provided self-adhesive Velcro strips to 5 x 2 cm each.

Step 2

For additional protection against the premature detachment of the self-adhesive Velcro strips, carefully round the corners of the Velcro strips when cutting them with scissors.

Step 3

Carefully peel off the backing from the self-adhesive Velcro strips.

For the best hold (optional): Apply the included super glue extensively to the adhesive surfaces of the Velcro strips.

Attach the two Velcro strips to the heel of each shoe. Ensure that the surface of your shoes is clean, dry, and smooth.

Apply pressure to the adhesive areas for about one minute. Wait approximately 24 hours for the glue to fully cure before using your Tidy Gaiters.

How to Put On Your Tidy Gaiters

Step 1

Slip your feet into your Tidy Gaiters. Put on your shoes as usual, then pull the Tidy Gaiters down over your shoes.

Step 2

Align the Velcro area on the heel of the gaiters with the adhesive Velcro strip on the heel area of your shoes and secure it in place by applying gentle pressure.

Step 3

Hook the front hook under the shoelaces in the front area of your shoes.

Ensure that the gaiters fit snugly and with slight tension around the shoe.

Your Tidy Gaiters are now ready for use.

Tip

If the opening of the front hook is too shallow or if you have trouble hooking it onto your shoelaces, you can carefully widen the front hook. To do this, use a flat tool such as the tip of a flathead screwdriver.